Brick Paver Installation & Edging



Staging of material

A lot of paver projects will differ depending on access, website conditions, project size and of course, the weather condition. Mindful consideration needs to be taken to determine the time to begin the paver installation.

The foreman or job supervisor ought to constantly have the materials (sand/ pavers) dispersed around the project website for easy and efficient installations. Paver pallets/bundles need to be put in a way not to interfere with the paver installation. The appropriate pallet/bundle placement can make the actual task installation simpler and quicker by minimizing the total labor of handling the product.

Brick paver patterns

Pavers can be positioned in many different patterns depending upon their shape. Each paver shape will generally have a number of various hatch patterns that are provided by the producer.

Professionals require to take into consideration the traffic weight loads on their paver jobs. In a lot of applications around the world, it has been shown that pavers laid in a herringbone pattern have actually carried out properly.

Pavers that are 60 mm (2 - 3/8 in) density appropriate for pedestrian applications. Pavers that are going to be utilized in commercial or industrial applications should be 80 mm (3 - 1/8 in) in thickness.

Reference/starting point for brick paver installation

There are a variety of conditions that figure out the starting point of a paver project.

When starting to set up pavers it is best to snap a real straight chalk line on the surface of the bedding sand or pull a true straight string line above the surface area of the bedding sand at the ended up elevation of the pavers This will assist as a guide for maintaining straight joint lines and will also enable the installer to make changes in the positioning of the pavers.

Buildings and concrete curbing are typically not straight and must not be utilized for establishing straight joint lines. The use of string lines is essential to identify the real straightness of the edge. As the paver installation advances, the string lines will assist decrease the need for small trim pieces.

These will maintain a minimum joint width and enable the bedding and jointing sand to go into in between each paver. Pavers with spacer bars are normally not laid in snug versus each other given that a string line will supply constant joint spacing.

Installation of brick pavers.

One of the most commonly utilized techniques for the installation of pavers is hand installation of each paver. It is best to install a single row of pavers along one of the true straight lines that you have pulled or above the bedding sand. The best method is to place a paver against another one and let it slide down into the bed linen sand.

When setting up pavers on a high grade, they must be set up at the base of the grade going uphill. This will avoid the pavers from creeping as they are being laid.

The best way for setting up pavers on big tasks is to install them mechanically. There are a couple products a professional ought to consider before setting up pavers mechanically:

1.) Mechanical installers are just efficient in installing pavers in certain patterns.

2.) The contractor needs to make certain that the maker can manufacturing and bundling pavers in the desired pattern on the pallets for simple mechanical installation.

Poor color blending might result in an irregular looking installation. Many manufacturers are consistent with color mixing on each bundle of pavers, but it is the specialist's duty to guarantee proper blending in the field.

Cutting procedures for brick pavers.

Specialists usually have two methods of cutting pavers. When cutting pavers wet, it will help lessen dust and will lengthen the diamond blades life. The operator of the brick saw need to constantly cut the pavers away from the surface of the paver field when cutting damp, due to the fact that the pavers will create a slurry that will stain the paver surface area.

The brick saw operator ought to always use the appropriate protection that is required for running a saw, such as eye, ear, respiratory and hand protection ).

Edging types

Edge restraints play a significant role in the total success of an interlocking pavement installation Edging restraints get rid of lateral motion of the pavers and hold the pavers firmly Tree Service Del Ray Beach together. Especially at the external boundary of the paver application, without an edging restraint, your task is guaranteed to stop working gradually.

Usually manufactured edge restraints are the most typically used by professionals. Manufactured edging restraints can vary from, plastic edging, steel and aluminum, timbers or precast concrete and stone.

Edging installation.

This might result in the migration of the bed linen sand and eventual lateral motion of the pavers. If there is a possibility of losing bed linen sand between the pavers and the edge restraint, then geo textile material is advised. When a gap in between the pavers and the edging goes beyond 3/8" (10mm), then the space must be filled with cut pavers.

Compaction of brick pavers.

After installation, the pavers need to be compressed. The entire area that is to be compressed should be swept clean of any foreign things and debris that can cause scratching or scuffing on the surface of the pavers.

In addition, it is essential that the very first compaction takes location prior to any jointing sand has been applied to the pavers. If jointing sand is used to the pavers prior to compaction takes location, this can cause a bridging problem and will not enable the joints to be entirely filled with jointing sand. This can also prevent the pavers from being effectively set into the bed linen sand.

When compacting the pavers, it is suggested that you make a minimum of 2 passes in various directions throughout the pavers. This will permit the pavers to be properly set in the bedding sand and will require the bed linen sand up into the joints from the bottom of the pavers.

The compaction of the pavers is really critical to the final performance of the pavers. Failure to do appropriate compaction can lead to contortions and pavement failure with time.


Paver pallets/bundles should be placed in a manner not to interfere with the paver installation. One of the most commonly utilized approaches for the installation of pavers is hand installation of each paver. The operator of the brick saw should always cut the pavers away from the surface of the paver field when cutting wet, due to the truth that the pavers will produce a slurry that will stain the paver surface area. Edging restraints remove lateral motion of the pavers and hold the pavers tightly together. When a gap between the pavers and the edging surpasses 3/8" (10mm), then the space must be filled with cut pavers.

Leave a Reply

Your email address will not be published. Required fields are marked *